Ansul

Fire Fighter proudly distributes Ansul products in Malaysia
Red Line Portable & Wheeled Fire Extinguisher
RED LINE cartridge-operated fire extinguishers are the premium firefighting units preferred by safety directors worldwide in high fire-risk industries such as chemical, petro-chemical, oil and gas, mining, aviation, and power generation. Cartridge-operated means increased reliability, on-the-spot recharge, ease of service, and superior firefighting performance.
RED LINE Wheeled dry chemical fire extinguishers are made specifically to protect people and property in areas where the potential for large-scale fires is always present. Airports, loading docks, steel and iron mills, paint spray booths, dip and quench tanks, offshore platforms, loading racks, fuel storage, and heavy manufacturing areas benefit from the protection offered by these industrial high-hazard fire extinguishers.
Dry Chemical and Dry Powder for Fire Extinguisher

Ansul FORAY may be used to combat fires in ordinary combustible materials such as wood, cloth, paper, rubber and many plastics (Class A) as well as fires in flammable liquids, gases and greases (Class B) and fires involving energized electrical equipment (Class C). FORAY is of particular value on combination fires (Class A and B together) and on Class A fires at temperatures which would freeze water. A typical application is the heavy equipment used in the logging industry.

Cleanguard FE-36 Clean Agent Fire Extinguisher

CLEANGUARD Clean Agent Extinguishers are designed for the protection of commercial and industrial facilities that typically contain sensitive or irreplaceable equipment and materials that could be damaged or destroyed by water, foam, dry chemical, or carbon dioxide. CLEANGUARD extinguishers are electrically nonconductive, environmentally friendly, and extremely low in toxicity.

K.Guard Wet Chemical Kitchen Fire Extinguisher

K-GUARD extinguishers contain ANSULEX Low pH  Liquid Fire Suppressant, a specially formulated, aqueous solution. In addition to knocking down the flame and forming a vapor-securing blanket, ANSULEX agent provides a cooling effect that aids in extinguishment and securement of hot cooking fuels.

High & Low Pressure CO2 System

Carbon dioxide suppresses fire without leaving any residues after discharge, avoiding damage to sensitive equipment. With no agent clean up, there is less downtime after an incident. When properly designed, the carbon dioxide system will suppress fire in Class A, B, and C hazards by displacing the air containing oxygen that supports combustion.

The Mini-Bulk Low Pressure Carbon Dioxide Systems (left in pic) provide an alternative to manifolding high pressure cylinders. The tanks are configured vertically to save valuable floor space. Mini-bulk tanks provide protection for non-occupied total flood, local application hazards, hose reels or custom designs such as inerting or spurt systems.

Foam System Hardware

The entire ANSUL line of high quality bladder tanks has been redesigned to offer design flexibility, lead time reduction and field usability. The new tanks are configurable for a wide range of options. Bladder Tanks are a component of a balanced pressure proportioning system that includes a pressure-rated tank with an internal elastomeric bladder.

The Foam Systems Mobilcart is designed to provide mobile firefighting foam capability for various hazardous areas where flammable liquids are present.

Agents
  • Class B Polar Solvents (AR-AFF)
  • Class B Hydrocarbons (AFFF)
  • Class A, B, & LNG Fires High-Expansion Foam
  • Class A Foam Agents
  • Fluoroprotein Foam
  • Vapor Suppression
  • Training Foam 3% or 6%

VESDA® Detection Equipment VESDA aspirating smoke detectors buy the critical time needed to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. VESDA detectors have multi-level warnings and a wide range of sensitivity where minute levels of smoke can be detected before a fire has time to escalate. VESDA detectors accommodate a broad range of environments and applications: small to very large open spaces and cleanest to dirty environments. INERGEN Systems – 150-BAR & 200-BAR

The INERGEN Fire Suppression System protects enclosed areas where people may be present, fire may strike day or night, and damage from conventional agents cannot be tolerated. Upon discharge, INERGEN agent fills the room, mixing with the air to suppress fires quickly and effectively.  Safe for people, INERGEN agent is non-synthetic and made of naturally occurring gases: nitrogen, argon, and carbon dioxide. Once discharged, it returns to the atmosphere in its natural state.

INERGEN agent is free of residues and corrosive by-products that may produce further property damage. And because it poses no ozone depleting or global warming threat, INERGEN agent will never be subject to future legislative bans.

Sapphire Fire Suppression System

The SAPPHIRE Clean Agent System quickly suppresses fires and protects sensitive equipment without causing harm to people or the environment. The system is especially suited to suppress fires in areas where an electrically non-conductive medium is required, where electronic systems cannot be shut down in an emergency, where cleanup of other agents poses a problem, and in normally occupied areas that demand a non-toxic agent.

Detection Systems

AUTOPULSE detection, control and fire suppression system release panels provide automatic 24/7 fire protection. Detection options include smoke, heat and flame detection. The control panels process detection signals from protected areas and immediately perform key operations including sounding alarms, shutting down equipment and releasing the fire suppression system.

For more information, download an Ansul catalogue here.

For any inquiries and information, please contact us and a customer service representative will contact you shortly.
Alternatively, you can give us a call at +60 3 7962 9999 or WhatsApp us at +60 19 999 4999